XEROX WIDE FORMAT COPY SYSTEM Main Menu • 99NOTE: To prevent images from being lost, feature time-outs will notoccur during the sets build process.• PRINTER INTERRUPT - Controls how long the Printer remainsin the interrupted state with no interruption at the ScannerControl Panel. This timer pertains to print jobs that have beeninterrupted to allow a copy job to process. The allowed range is1 to 99 minutes. The factory default is 1 minute.• FILE DELETION - Specifies the maximum amount of time ascanned image file remains on the file system before beingdeleted. This timer pertains only to files scanned when theWIDE FORMAT COPY SYSTEM is in the READY TO SCANmode. This timer can be set between 1 and 24 hours inincrements of 1 hour. When a file is scanned in, it is given a timestamp. When the age of the file on the hard disk exceeds thevalue of the FILE DELETION timer, the file is automaticallydeleted to allow space for new files. The default value is 24hours. After the files have been deleted, the directory will also bedeleted if no other files are scanned to it.To adjust a timer:1. Press the Menu key. The MAIN MENU screen is displayed.2. Press the Enter key to select CONFIGURATION. TheCONFIGURATION menu screen is displayed.3. Press the Next key until TIMERS is highlighted.4. Press the Enter key to select TIMERS. The TIMERS screen isdisplayed.TIMERSFEATURE (0 — 99) MIN 60PRINTER INTERRUPT (1 — 99 MIN): 1FILE DELETION (1-24 HR): 245. Press the Previous or Next key to highlight the desired timer.6. Press the Enter key to select the highlighted timer.7. Use the numeric keypad to enter the timer value.8. Press the Enter key to confirm the value.9. Repeat steps 5 through 8 if you want to set the value foradditional timers.10. Press the Exit key to return to the CONFIGURATION menuscreen.The POWER SAVER option of the CONFIGURATION menu allows youto set the number of hours of inactivity after which the system goes intoPower Saver mode.POWER SAVER
