20 •Getting to know the WIDE FORMAT COPY SYSTEM XEROX WIDE FORMAT COPY SYSTEMNOTE: If the indicator lamp is already lit, press the key once to displaythe screen.MANUAL REDUCTION/ENLARGEMENTENTER (25.0 – 400.0): 100.0%2. Enter a reduction/enlargement between 25 and 400. You canselect any value between these limits in 0.1% increments.3. Press the Enter key to confirm your choice and return to theREADY screen. The READY screen now displays the newreduction/enlargement percentage.NOTE: Pressing the Exit key rejects the choice and retains the previoussetting.PresetPreset (factory default) allows you to select a predefined reduction orenlargement percentage.To select the Preset mode:1. Press the key under Reduce/Enlarge until the Preset indicatorlamp illuminates. The PRESET REDUCTION/ENLARGEMENTscreen is displayed.NOTE: If the indicator lamp is already lit, press the key once to displaythe screen.PRESET REDUCTION/ENLARGEMENTSELECT: 100.0%2. Press the Previous or Next key until the desiredreduction/enlargement ratio is displayed. The possible choicesare any combination of the following:• 50%, 100% (default), and 200%• 65% and 129%, if the ANSI and ARCH sizes are enabled• 71% and 141%, if the ISO A, ISO B or JIS B sizes are enabled• Up to six additional preset values, if these values have beendefined using the CUSTOM R/E Presets menu function.
