4 Image Quality52 Wide Format Copy System User GuideDo one of the following:• For PREVIEW, press the Enter key to enable or disable the option. Acheckmark appears in the box to the left of the option when the option is enabled.The factory default setting is enabled.• For COMPRESSION, press the Previous or Next key to highlight the desiredsetting. Then press the Enter key to select the highlighted format. The choicesare RAW and PACKBITS. The factory default setting is RAW.4. For FILE FORMAT, the only selection is TIFF. Repeat steps 3 and 4 to change theremaining setting, if desired.5. Press the Enter key to confirm the selection.6. Press the Exit key to return to the Ready screen.Type, ColorColor — Select Color when scanning full color documents. When Color Type is selected, aversion of the following screens will be displayed. The content of the screen will depend on theselected FORMAT and COMPRESSION.This screen will only be displayed in SCAN mode when the Scan-to-Net and Color Enablementfeature keys are installed. The Normal and Photo LEDs will be lit when Color is selected.To select the scan options for Color Mode:1. Press the Mode key. The Please Enter Directory screen is displayed.2. Enter the Directory Name. The READY TO SCAN INSERT DOCUMENT screen isdisplayed.3. Select the Color by pressing the arrow key below the Original, Type key until theNormal and Photo lights come on. The SCAN OPTIONS (COLOR) screen isdisplayed.4. Use the Enter key to enable/disable checkbox selection and the Next or PreviousKey to select options with a colon (e.g., FORMAT: TIFF).The options available for selections displayed on the screen will change depending on theFORMAT and COMPRESSION that are selected. Listed below are the selections and availableoptions and their definition:PREVIEW - Use this checkbox to enable or disable the generation of a preview image foryour scanned document. Default is enabled (checkbox is checked)FORMAT - Use this selection to determine which format you would like to have thescanned image saved in, TIFF, JPEG, or PDF/A. Default is TIFF.COMPRESSION (TIFF selected) - Use this selection to determine the compressionmethod to apply to the saved TIFF document. Select one of the following:PACKBITS - Saves the document as 24-bit RGB compressed.INDEX - Saves the document as 8-bit indexed RGB (using thresholding) compressedwith PACKBITS.INDEX ED - Saves the document as 8-bit indexed RGB (using error diffusion)compression with PACKBITS
