2 Getting to know the Wide Format Copy SystemWide Format Copy System User Guide 37Powering the Xerox 6204 Wide Format Solution On/OffThe following describes the procedure for powering the Xerox 6204 Wide Format Solution withFreeFlow Accxes Print Server on and off.Powering On the System1. Move the printer circuit breaker switch up, to the On [ | ] position.2. Move the printer power switch to the On [ | ] position.3. Press the power button on the front of the controller.The power button lamp will illuminate. After about one-half minute, the control panel will displaythe message Printer Warming Up. The machine will be print-ready in about three minutes.CAUTION: Powering down the system incorrectly may result in data corruption and a servicecall. The system shutdown procedure below allows the controller to power down correctly.Shutdown is best performed through the Web Printer Management Tool or the control panel’sSystem Administration menu’s [Shutdown] feature. Only authorized persons should power downthe system fully.Powering Off the System1. Ensure that all jobs have finished processing, and that the indicatoron the control panel is not illuminated.2. Select [Shutdown] from either the control panel or the Web Printer Management Tool.From the control panel1. Select the button and enter the System Administration password.2. Select the [Shutdown] button. The [Power Off] screen will display briefly on thecontrol panel, and then the control panel and the printer will shut down.Power ButtonCircuit BreakerPrinter PowerSwitch
