Xantrex TC1012 Owner's Manual

Also see for Truecharge TC1012: Installation guide Owner's guide Installation guide

Xantrex TC1012 Owner's Manual Manual pdf 47 page image

Accessing Charger Information975-0401-01-01 2–15There is only ONE way to safely turn the Truecharge™ 2Battery Charger off (Disable):◆ Disconnect the AC power at the source and disconnect allDC batteries.This is the only state where the Truecharge™ 2 BatteryCharger is completely de-energized.When the Truecharge™ 2 Battery Charger is disabled, theoptional remote panel is inactive.Accessing Charger InformationThe Truecharge™ 2 Battery Charger provides a lot ofinformation about the status of the charger and the batteries.Reading Remote Panel and Onboard Display LEDsThe remote panel and onboard display panel show what ishappening during the charging process and are also helpful introubleshooting. Refer to Chapter 3, “Interpreting Fault andWarning Indicators” on page 3–4 for information aboutinterpreting the onboard display panel (and the optionalremote panel, if installed) indicator LEDs.Reporting While Charging or EqualizingAfter configuring the charger and during charging, theonboard display panel (and the optional remote panel, ifinstalled) will show the following information about thecharger and the battery:• Charging Output Current• Charger Status• Battery Status (optional Remote Panel only)If there is a fault or warning related to one of the banks, thefault or warning information will display in the form ofilluminating or flashing Fault indicator LEDs. Charging forall banks will stop and will only resume once the faultcondition is cleared.