XVision Elite 9004P User Manual

Contents

XVision Elite 9004P User Manual Manual pdf 84 page image

• Folder select: Choose or make the folder for the data which is copied out from theElite NVR remotely.• Save: Apply and save the current modification.• Close : exit the ‘Config’ pop-up.4: Split mode selection: choose the number of cameras which will be shown in the live preview window.• 1 / 4 / 9 / 16 / 25 / 36 / 49 / 645: Minimize/Maximize/Close NVR Manager• : Minimize the window• : Maximize the window• : Exit the ‘NVR Manager6: Live View Window: show the live preview video of the connected Elite NVR.7: NVR List Window: list the registered Elite NVRs and indicate the connection status. When the EliteNVR is linked, the IPC’s connected on that Elite NVR are listed under the Elite NVR.8: NVR Information: Show some information of the Elite NVR selected.9: Version: the version number of the Elite NVR Manager8.5.4 Connection managerThis provides the way to register the Elite NVRs into the NVR list, remove the Elite NVR from the NVRlist and editing the Elite NVR connection information.• NVR Name: The name which you give to the Elite NVR which has the following connectioninformation.• NVR Address: specify the IP address of the Elite NVR83