9. Updating system F/W9.1 How to check current installed F/WF/W upgrading could be required to increase the stability and the reliability or apply the new updatedfeatures. The following steps are a process to upgrade the F/W.You will need to check the F/W version available and the F/W version currently installed on the EliteNVR. From the Setup=>system=>management, you can see the current version of F/W.The update F/W file will include the version in it name e.g. 1.11Check the F/W version.• The ‘FW_X.XXX_UI_Y.Y.YS’ in the file name meansthe F/W version.Do not update F/W if the version number of F/W file is lower than the currentF/W version installed.9.2 Preparing new F/W (Type *.zip) in a USB thumb driverF/W will be available from Xvision support sites or please contact your place of purchase1) Unzip firmware file.99
