4.1.8 PTZWhen the display mode is set to split screen, the PTZ control panel will be used for the selectedcamera which is highlighted by the mouse click. If there is no highlighted camera, the PTZ controlpanel will control camera 1 by default. In single display mode, the PTZ control panel is used for thecurrently displayed camera.[PTZ Controller Screen]①⑥② ③ ④ ⑤⑦ ⑧1: Select channel for PTZ control.2: Number to configure Preset.3: Select the tour function start or end.4: Control the PTZ.5: Change the size of control box.6: Display PTZ control parameters which are set under the ‘DETAIL’ of PTZ menu settings7: Execute the automatic focus.8: Execute the auto scan.16
