X-Rite i1PRO Quick Start Manual

Also see for i1Pro: User manual

Contents

X-Rite i1PRO Quick Start Manual Manual pdf 14 page image

ENDisplay MeasurementTo prepare your i1Pro device for a display measurement you need to mount the i1Prodevice on the display holder. Make sure your device is calibrated and the statusindicators are pulsating white before you mount it.1. You can adjust the length of the counter weight of the display holder for the sizeof your screen. The counter weight is equipped with hook-and-loop fasteners onboth ends which allow you to shorten and lengthen the display holder to the correctlength.2. Mount the i1Pro measurement device on the display holder by inserting themounting connector on the display holder in the mounting interface at the rear of thei1Pro device. Make sure that the nose of the i1Pro device seats firmly in the displayholder.3. Fix the i1Pro measurement device in the middle of your screen.4. Set the software for display measurement and start the measurement process in theapplication. Status indicator lights switch off during measurement.5. To remove the i1Pro device from the display holder, gently pull the mountingconnector with the display holder out of the mounting interface at the rear of thei1Pro device.