X-Rite capsure User Manual

X-Rite capsure User Manual Manual pdf 28 page image

CAPSURE User Manual28Matching a Patterned or Multicolored Sample with Color PickerThe Color Picker function is used on patterned, woven or multicolored samples that you wish tomatch a specific color from. Up to four colors within your image can be identified. For example,this can be used if you did not wish to extract individual shades on textured surfaces or textileswhere potential multiple colors may be found.1. Make sure the aperture is set to the Automatic/Large option. This enables the instrument toautomatically determine if there is more than one color in the measurement area.2. Take a measurement as described in the Matching a Sample section earlier in this manual.The initial color displayed in the Match window is the average color across themeasurement area. Once CAPSURE detects a sample containing more than one color, theColor Picker icon in the function bar begins rotating and an audible tone is heard. Thescreen then automatically advances to the Color Picker function. Individual colors areselected from this screen.3. Color descriptions for each color can be displayed by pressing on the up or down sides ofthe Navigation control. The selected color is highlighted around the circle.4. Select the desired color by pressing Enter to display details of the match.EnterbottomNav. upor downNav. upor down