X-Rite capsure User Manual

X-Rite capsure User Manual Manual pdf 25 page image

CAPSURE User Manual25Matching a SampleMake sure the white reference slider is in the storage location and position the CAPSURE onto the sample as previously explained.1. Lightly press and hold the Measure button to activate the preview. The area to bemeasured is indicated in the preview by the circle.Three measurement areas are available:• Small (2 mm aperture)• Medium (4 mm aperture)• Automatic/Large (8 mm with automatic multicolor extraction and texture compensation)2. Adjust the measurement area by pressing on the up or down side of the Navigation controlwhile lightly holding down the Measure button.(2 mm) (4 mm) (8 mm)Note: You can preset your aperture preference in the Settings menu.3. When you have located the area you wish to measure, press the Measure button firmly. Anaudible “camera-click” sound indicates the start of the measurement. A progress barappears at the bottom of the display to indicate the measurement status. It is importantthat the instrument is held steady for the duration of the measurement.The closest match is displayed for the measurement from the active fan decks. Refer to theSetting Menu section earlier in this manual for procedure on activating fan decks.Measurement areawithin circleNav. upor downNav. upor down