Menu
Wallenstein BXM Series Manual
                                                    | |
Contents
| 
Safety18BXM32, BXM423-point Hitch Chipper-ShredderSafety Signs3.3 Replacing Damaged SafetySigns• Always replace safety signs that are missing or havebecome illegible. Replacement safety signs are availablefrom your authorized distributor, dealer parts department,or the factory.• Keep safety signs clean and legible at all times.• Parts replaced that had a safety decal on them must alsohave the safety sign replaced.ProcedureInstallation area must be clean and dry. Make sure the surface isfree of grease or oil. Ambient temperature must be above 50 °F(10 °C).NOTE: Determine exact position before removing thebacking paper on the decal.1. Peel the decal off the backing sheet.2. Align the decal with an edge on the machine if possible.3. Starting on one edge, carefully press the center of theexposed sticky backing in place, smoothing it out as youwork from one side to the other.4. Use a squeegee, credit card or similar to smooth it out.Work from one end of the decal to the other end.Small air pockets can be pierced with a pin and smoothed outusing the piece of sign backing paper. |
Related manuals for Wallenstein BXM Series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved