Menu
Veetsan VDH63 Instruction Manual
                                                                                      | |
Contents
| 
28I11 Machine disposalAt the end of the product’s life cycle, make sure theequipment is not dispersed in the environment. Theequipment must be disposed of in compliance with cur-rent regulations in the country of use.All metal parts are in s/steel (AISI 304) and removable.Plastic parts are marked with the letters of the material.The symbol on the product indicates that thisproduct should not be treated as domestic waste, butmust be correctly disposed of in order to prevent possi-ble negative consequences for the environment and thehuman health.Regarding the recycling of this product, please contactthe sales agent or dealer of your product, your after-salesservice or the appropriate waste disposal service.I12 TroubleshootingDISHWASHER DOES NOT WASH WELL1. Check if the suction filter is dirty and clean it thoroughly.2. Check if the wash jets are clogged by solid food remains.3. Check that the initial amount of detergent or subsequentadditions are correct.4. The selected wash cycle is too short. Repeat the cycle.5. Check that the tank temperature is at least 55°C / 131°F.6. Check that the dishes are stacked correctly in the racks.GLASSES AND DISHES ARE NOT DRIED PROPERLY1. Check that there is rinse-aid in the container and if neces-sary top up.2. Check the set amount of rinse-aid (see “setting thedispensers” paragraph).3. Check that the water temperature is between 80°C and90°C.CONDENSATION ON GLASSES1. Check that there is rinse-aid in the container and if neces-sary top up.2. Check the set amount of rinse-aid (see “setting thedispensers” paragraph).3. Remove the rack of glasses immediately the cycle hasended.STAINS ON THE GLASSES1. Only use “non-foaming” products for professional dishwa-shers.EXCESSIVE FOAM IN THE TANK1. Check that the wash water temperature is not less than55°C / 131°F.2. Check if the amount of product dispensed by the deter-gent dispenser is excessive (see “setting the dispensers”paragraph).3. Ensure that the tank has not been cleaned with unsuitablecleaners. Drain the tank and rinse thoroughly before newwash cycles.4. If a foaming detergent has been used, drain and refill thetank with water until the foam disappears.SMEARS OR SPOTS ON THE GLASSES1. Reduce the amount of rinse-aid (see “setting the dispen-sers” paragraph).THE WASH OR RINSE ARMS TURN SLOWLY1. Remove and thoroughly clean the arms.2. Clean the wash pump suction filter. |
Related manuals for Veetsan VDH63
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved