VECTRIX VX-2 SERVICE MANUALSECTION C-4:HANDLEBAR-LEFT SWITCH ASSEMBLYPreparations:Disassemble Front Fairing see Section B-1Disassemble Front Console Cover see Section B-2Disassemble Vertical Panel Cover-Lower see Section B-4Disassemble Vertical Panel Cover-Upper see Section B-5(If newer VX-2 model) Remove Front Console Cover for ICM see Section B-2Remove all cable stripsOpen connector CN1 from the Interface Control Module(ICM)Additional information see Section 1 of F-1Unscrew the Phillips screw with a Phillips screwdriver PH2Unscrew the Phillips screw with a Phillips screwdriver PH2Remove the Left Switch assemblyAssemble all parts in the other directionTest functions of Left Switch assemblyVersion 1.0/May 2011VECTRIX, LLC