VECTRIX VX-2 SERVICE MANUALSECTION B-9:UNDER BOARDUnscrew the two Phillips screws (left and right position)with a Phillips screwdriver PH2Unscrew the screw (Front position) with a 8mm wrench1Version 1.0/May 2011642Unscrew the 6 Phillips screws in order as seen on thepicture with a Phillips screwdriver PH2While loosening screws 5 and 6 hold the Under boardotherwise it drops down and could break!53Assemble all parts in the other directionRemark:When assembling the cover, please take care of the noses are in the right position and no edgeis outstanding. First, just slightly screw in the screws and if all screws and the cover are in thecorrect position tighten the screws.VECTRIX, LLC