VeEX MTTplus User Manual

Also see for MTTplus: Getting started guide

Contents

VeEX MTTplus User Manual Manual pdf 5 page image

2.0 Safety InformationSafety precautions should be observed during all phases of operation of this instrument. The instrument has been designed toensure safe operation however please observe all safety markings and instructions. Do not operate the instrument in thepresence of flammable gases or fumes or any other combustible environment. VeEX Inc. assumes no liability for the customer'sfailure to comply with safety precautions and requirements.Optical ConnectorsThe test platform displays a laser warning icon when the laser source is active to alert the user about a potentially dangeroussituation. It is recommended to:1. Deactivate the laser before connecting or disconnecting optical cables or patchcords.2. Never look directly into an optical patchcord or an optical interface (e.g. CFP, CFP2, CFP4, QSFP+, XFP, SFP+, SFP,OTDR, LS, VFL) while the laser is enabled. Even though optical transceivers are typically fitted with Class 1 lasers, whichare considered eye safe, optical radiation for an extended period can cause irreparable damage to the eyes.3. Never use a fiber microscope to check the optical connectors when the laser source is active.Electrical ConnectorsTelephone lines may carry dangerous voltages. Always connect the electrical test ports to known test interfaces which carry lowlevel signals.Go back to TOCMTTplus e_Manual D07-00-096P RevA00Page 5 of 66