TROUBLESHOOTING AND M AINTENANCEA02.96 73.000 1 D 02-May-03 85Color Filter ReplacementWARNING: Remove power from luminaire before performing maintenance.Tools:Screwdriver, Phillips #2Cotton glovesTo remove and replace a color filter:Step 1. Remove power from luminaire.Step 2. At removable cover, using #2 Phillips screwdriver, turn two captive screws one-quarter turnand remove cover. (It will remain attached by tether and lamp wires.)Figure A-2: Replacing a Color FilterCAUTION: Do not touch color filters with bare fingers. Wear cotton gloves or other covering whilereplacing. Clean with glass cleaner and soft cloth if required.Captive ScrewsRemovableCoverColor/Gobo/LinkIris BulkheadColor WheelBulkhead Captive ScrewFinger AccessCutout(behind plate)www.carlosmendoza.com.mx
