Menu
VCS VideoJet 100 Manual
Also see for VideoJet 400 19": Manual
                                                                                                                                        | |
Contents
| 
Installation46VCS 100seriesCommissioningwith terminal programData terminal You can connect a data terminal to the VCS unit for putting it intooperation and for the local control. The data terminal consists of acomputer with a terminal program. For the connection use a serialstandard cable.You can use e.g. the Windows application HyperTerminal as ter-minal program." First, disconnect the VCS device from the network." Connect the sub-D jack COM of the VCS device to a free serial portof the computer.Configuring theterminal programThe transmission parameters have to match for communicationbetween terminal program and VCS device. Set the followingvalues for the terminal program:! 19,200 Bit/s! 8 data bits! No parity check! 1 stop bit! No protocolNoteInformation on the installation and use of HyperTerminal can befound in the documentation or in the online Help for Windows. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved