V2 CITY1 Manual

Also see for CITY1: Manual

Contents

V2 CITY1 Manual Manual pdf 24 page image

ENGLISH47CONNECTION SUITABLE CABLE[N° WIRES PER SECTION] SUITABLE CABLE GLANDNETWORK 3 x 1.5 mm2 PG9: For cables with external Ø from 5 to 8 mmACTUATOR 4 x 1 mm2 PG9: For cables with external Ø from 5 to 8 mmEXTERNAL ANTENNA SCREENED RG58 PG9: For cables with external Ø from 5 to 8 mmFLASHING LIGHT 2 x 1.5 mm2 PG9: For cables with external Ø from 5 to 8 mmELECTRO LOCK 2 x 1.5 mm2 PG9: For cables with external Ø from 5 to 8 mmOTHER WIRINGSMULTIPOLARn x 0.25 - 0.5 mm2(n) depending on the number ofwirings to be madePG9: For cables with external Ø from 5 to 8 mmPG11: For cables with external Ø from 7 to 10.5 mmPG13.5: For cables with external Ø from 9 to 12.5 mmCABLES TABLEFor the wiring to the control unit refer to the following table: WARNING: To assemble a PG cable gland higher than 9 it is necessary to enlarge the pierce on the plastic shell. Instead of the cablegland, it is possible to use flexible pipes with IP55 connection.

/ 26

Related manuals for V2 CITY1