UniPOS IFS7002R Instruction Manual

Also see for IFS7002R: Installation manual Service instructions for the staff

UniPOS IFS7002R Instruction Manual Manual pdf 25 page image

UniPOS Repeater IFS7002RInstruction Manual Page 25Revision 2/16.11.09 Of 62The screen shows the connectedobjects and prides information:- CAN Address- Object Name- Status- Faults- Fires- Disabled outputsThe symbol “>>” is on posiiton of thefirst remote objects.With buttons (“Move Down”) and(“Move Up”) select the concreteremote panel, which faults will shownon the display.9.4.1.2. Screen “Repeater configuration”The screen displays informationassociated with:- The repeater local networkcondition (On or Off).- The selected language ofthe text messages.- Check for ground wire (thisoption is not active for therepeater).The software version of the repeateris displayed in the right part of theheading line, for example“v16.11.09”.9.4.1.3. Menu “Repeater parameters”Use the menu if the repeater is connected to PC or to view the parameters of the established CANnetwork.The menu contains two subordinate menus:- Menu “Network”- Menu “Local Network”Mode DAY REP ActInp: 0000 11:44:29 Wed 24 Aug 2011Repeater IFS7002RUniPOSList CAN ObjectsTotal connected CAN objects: 6Addr Name Stat Faults Fires DiOut>> 2 Building#1 Yes 0000 00/00/00 0/03 Building#2 Yes 0000 00/00/00 0/04 Building#3 Yes 0000 00/00/00 0/05 Building#4 Yes 0002 00/00/00 0/06 Ware house Yes 0000 00/00/00 0/0Mode DAY REP ActInp:0000 11:23:10 Wed 24 Aug 2011Repeater IFS7002RUniPOSRepeater configuration v16.11.09Local network: OnPeriphery device 1: nonePeriphery device 2: nonePeriphery device 3: nonePower loop: OnLanguage: BulgarianCheck for ground wire: Off