UniPOS IFS7002R Instruction Manual

Also see for IFS7002R: Installation manual Service instructions for the staff

UniPOS IFS7002R Instruction Manual Manual pdf 20 page image

UniPOS Repeater IFS7002RInstruction Manual Page 20Revision 2/16.11.09 Of 62Menu "List / Faults / Total" (Appendix 2) provides specific information about any damage. They aredisplayed in order of their occurrence.The screen shows information aboutthis example:Faults total – 3.The first fault is in Zone 003 ofBuilding #4.The second fault is removed device,address…, zone… and fire controlpanel (actually, as it keeps device isin a zone, the damage it appears asa fault zone).To see the damage using thirdbutton ("Page Down") to go tothe next page. On each screenshowing two error messages.Exit from menu “List/Faults/Total” - button (“Exit”) or (“Cancel”).9. Information and Control Mode9.1. DescriptionInformation and Control Mode provides:- Display information about the repeater and the fire control panels connected to it.- Enter control data.To enter Information and Control Mode, press button (“Menu”) on the screen for Duty Mode,Fire condition, Fault condition (with the exception of the screen for fatal error), Test Mode andDisabled component.The screens visualized on the display are organized in a tree structure, containing subordinate menus(Appendix 2a).Repeater is in this state until:- Manual operation for exit - button or .- Entering the repeater in the Fire condition.9.2. Indication9.2.1. No specific LEDs or sound indication is provided for Information and Control mode.9.2.2. Text messagesWorking in Information and Control mode requires visual representation of various menues, screenand functions. The exact text indication is described in section 9.4.9.3. Using the keypadAvailable buttons:Button AccessLevel Action“Menu” Level 1 To enter Information and Control mode“Enter” Level 1 To enter a selected menuLevel 2 - To enter a selected submenuMode DAY REP ActInp: 0000 11:44:29 Wed 24 Aug 2011REPEATER IFS7002RUniPOSFaults total: 00001/00002*Disables total: 000Failed Outputs : 0000Disabled Outputs: 000List/Faults/Total 00030001 Fault in Zone 003 Building#4Zone: Zone 0030002 Removed device Building#4Zone 003 Loop 001 Addr003Zone: Zone 003Addr: Point 1.003