|
Low power WIFI module user manual http://en.usr.cnJinan USR IOT Technology Limited tec@usr.cnPage 50/724.2.2.37. AT+ WSMAC Function: Set/Query STA MAC address parameters; Format: Query OperationAT+WSMAC+ok=< LF >< LF > Set OperationAT+ WSMAC=+ok< LF >< LF > Parameters: code: security code 8888 (default value) Mac_address: STA MAC address, such as ACCF23FF12344.2.2.38. AT+ WSLK Function: Query STA WiFi link status Format: Query OperationAT+ WSLK+ok=< LF >< LF > Parameters: ret ”Disconnected”, if no WiFi connection; ”AP’ SSID（AP’s MAC” ）, if WiFi connection available; ”RF Off”, if WiFi OFF;4.2.2.39. AT+ WSLQ Function: Query STA WiFi signal strength; Format: Query OperationAT+ WSLQ+ok=< LF >< LF > Parameters: ret ”Disconnected”, if no WiFi connection; ”AP’s WiFi signal strength” , if WiFi connectionavailable;4.2.2.40. AT+WSCAN Function: Scan AP; Format:AT+ WSCAN+ok=< LF >< LF > Parameters:
|
