USR-K7 User Manual www.usriot.comJinan USR IOT Technology Limited 48 / 120 inquiry@usriot.com2. RTS/CTS: hardware flow control. The hardware flow control for K7 supports RTS/CTS.3. Xon/Xoff: software flow control. 3010 and later version enable the software flow control.Hardware or software flow control deal the serial port data for better. When the serial port received buffer dataout than the threshold value, inform the remote port stop sending data until complete buffering, then inform to dealwith data.Usually used in the situation that rich in time.4.3.3. Serial Port MappingAA AA AA BB BB BB5 ms 5 ms8ms 4ms20msBBBBBBAAAAAA串口 网络按时间成帧(10ms)AA AA AA BB BB BB5 ms 5 ms8ms 4ms20msBBBBBBAAAAAA串口 网络按长度成帧(长度5字节)The serial packing time and length of K7 can be set. Packing the serial port data according to the packing time andpacking length under the transparent transmission mode .The frame mechanism of serial port is based on the packaging time and the packaging length. The case are asfellow.1. Packing time set as 10ms and the length as 512.If the internal time for serial received the data more than 10ms, or the length more than 512, K7 send packing tonet when the serial port receive data.2. If the packing time is 0 and the packing length is not 0, only the packing length work; and if the packing length is0 and he packing time is not 0, only the packing time work.3. Set the packing time is 0 ms and the packing length is 0