UMC X32-GB-FTCD-UK User Manual

Contents

UMC X32-GB-FTCD-UK User Manual Manual pdf 19 page image

19TV MENU OPERATIONGENERAL SETTINGS MENULets you adjust the language, picture size,blue screen, add child lock, complete firsttime installation and reset the television.On Screen Menu LanguageLets you change the on screen menu language.1) Press [LCD-MENU] to enter menu2) Press [>] to move to General SettingsMenu3) Press [\/] to highlight Language4) Press [>] to change the language5) Press [EXIT] to exitPicture FormatLets you adjust the picture format1) Press [LCD-MENU] to enter menu2) Press [>] to move to General Settings Menu3) Press [\/] to highlight Picture Format4) Press [>] to change the pictureformat5) Press [EXIT] to exitBlue ScreenChanges the background when there isno input between clear and a blue background1) Press [LCD-MENU] to enter menu2) Press [>] to move to General Settings Menu3) Press [\/] to highlight Blue Screen4) Press [>] to switch between on and off5) Press [EXIT] to exitSystem LockThis menu allows you to lock certain features of thetelevision so that they can not be used or viewed. Forexample if you don’t want certain channels viewed bychildren or if the television is to be used in a hotel andyou want to limit the volume.You can lock any of the following - TV buttons,TV source, set default start up source and limit themaximum volume.1) Press [LCD-MENU] to enter menu2) Press [>] to move to General Settings Menu3) Press [\/] to highlight System Lock4) Press [>] to enter System Lock menu5) To enter this menu you will be asked for your pin code(Default is blank so you just need to press [OK]).6) To set locks you first need to switch System Lock toON, this will un grey the options.You can now select the following:Key Lock – Off/On – This stops the buttons on thetelevision working.Source Lock – Press [>] to enter then apply On to lockthe source so it can’t be usedDefault Source – You can set the default start up source,so when the television is turned on it goes to this source.Maximum Volume – You can limit the maximum volumeChange Pin Code – Press [>] to enter, first enter thecurrent code (default is blank so just press OK), thenenter your new code.7) Once you happy with the settings press [EXIT] to exitmenu.Channel Lock – please refer to Program Edit section toselect the channels that you require to lock. Once lockedyou can temporarily unlock a channel by entering the pincode, the lock will be re-applied by switching off the TVto standby and then back on.GENERAL SETTINGS MENUEnglishAutoOffGENERAL SETTINGS MENUEnglishAutoOffGENERAL SETTINGS MENUEnglishAutoOffGENERAL SETTINGS MENUEnglishAutoOffSYSTEM LOCKSystem LockKey LockSource LockDefault SourceMax VolumeChange PIN CodeOffOnATV99