Toshiba e-studio905 Operating Instructions Manual

Also see for e-studio1105: Operating instructions

Contents

Software Supplied on CD-ROMThis section explains the applications on the supplied CD-ROM.Auto-Run ProgramThis section explains the auto-run program.When the CD-ROM is inserted into a client computer running Windows 2000/XP/Vista/7 or WindowsServer 2003/2003 R2/2008, the installer starts up automatically (auto run) to install various software.• For installation, log on as an Administrators group member.• Auto-run program may not automatically work with certain operating system settings. If this happens,start "Setup.exe" on the CD-ROM root directory.• To disable auto-run, set CD-ROM while pressing the Shift key. Keep the Shift key pressed until thecomputer finishes reading from the CD-ROM.• If [Cancel] is pressed during installation, the installation of all the software thereafter will be stopped.If cancelled, reinstall the remaining software after restarting the client computer.TWAIN DriverThis section tells you the file path to the TWAIN driver and the TWAIN driver's system requirements.You must install this driver if you want to scan originals or use the machine as a network TWAIN scanner.File pathThe TWAIN driver is stored in the following folder on the CD-ROM:\DRIVERS\TWAINSystem requirements• Computer hardwarePC/AT-compatible machines that support the operating system properly• Operating systemMicrosoft Windows 2000/XP/Vista/7Microsoft Windows Server 2003/2003 R2/2008• Display resolution800 × 600 pixels, 256 colors or higher8. Appendix1688