Toshiba e-STUDIO200L Service Manual

Also see for e-STUDIO200L: User guide Operator's guide Service manual Service handbook Service handbook

Contents

e-STUDIO200L/202L/203L/230/232/233/280/282/283 © 2004 - 2008 TOSHIBA TEC CORPORATION All rights reservedGENERAL OPERATION4 - 10• Exit sensor detects jamming of the tailing edge of paper.ÈRegistration clutch OFFFig. 4-2È Less than 1.759 sec.Exit sensor OFFIf the exit sensor is not turned OFF after 1.759sec,ÈPaper jam (E020) Æ The copying operationis stopped.• Immediately after the power ONÈAny of all sensors on paper transport path detects paper (ON)ÈPaper jam (E030)• Front cover is opened during copyingÈPaper jam (E410)• Registration sensor detects jamming of the leading edge of paper:Registration sensor is not turned ON in a fixed period of time after the leading edge of paperpassed the 1st transport roller.ÈPaper jam (E200, E210, E270, E280, E300, E330 and E3C0)• During paper feeding from ADU:1st transport sensor is not turned ON in a fixed period of time after the ADU clutch is turned ON.ÈPaper jam (E110)• During paper transporting from ADU:ADU entrance/exit sensors do not detect the paper at the fixed timingÈPaper jam (E510 or E520)Registration clutchExit sensorTimer0Paper jam (E020)ONOFF1.759sec.