Toshiba e-STUDIO A Series Operator's Manual

3.Setting the IP Fax Function20 Setting the IP Fax Function from TopAccess14 Memory Transmission Report Selects how to print a result report after a memory transmission. OFF — Select this to not print a memory transmission report. Always — Select this to print a memory transmission report with all pageimages for each memory transmission completed. ON ERROR — Select this to print a memory transmission report with allpage images only when the memory transmission is not successfullycompleted. Always (Print 1st Page Image) — Select this to print a memorytransmission report with the 1st page image for each memorytransmission completed. ON ERROR (Print 1st Page Image) — Select this to print a memorytransmission report with the 1st page image only when the memorytransmission is not successful.15 Multi Transmission Report Selects how to print a result report after a multi-address transmission. OFF — Select this to not print a multi-address transmission report. Always — Select this to print a multi-address transmission report with allpage images for each multi-address transmission completed. ON ERROR — Select this to print a multi-address transmission report withall page images only when the multi-address transmission is notsuccessfully completed. Always — Select this to print a multi-address transmission report with the1st page image for each multi-address transmission completed. ON ERROR (Print 1st Page Image) — Select this to print a multi-addresstransmission report with the 1st page image only when the multi-addresstransmission is not successful.16 RX End Tone Selects how to sound the RX end tone after the completion of reception. OFF — The RX end tone does not sound. Print End — The RX end tone sounds at the completion of printing. Receive End — The RX end tone sounds at the completion of reception.17 TX End Tone Selects how to sound the TX end tone after the completion of transmission. OFF — The TX end tone does not sound. Always — The TX end tone sounds at the completion of transmission. ON ERROR — The TX end tone sounds in the case of a transmission failure. Normal End — The TX end tone sounds at the normal completion oftransmission.Item name Description