9. SPECIFICATIONS9.2 Options9-2SPAA-206-R19.2 OptionsOption Model DescriptionDRWST-51A-4MVK-QM-RDRWST-51A-8MVK-QM-R24V-drive standard drawer(With screw holes on the left and the rear for installing the POLST-51Dimensions and Weight:460(W) x 400(D) x 115(H) mm / 18.1(W) x 15.7 (D) x 4.5(H) inch10 Kg / 22 lbMoney Case Type: MC4, 8Type BillHolderCoinTray Mini Coin Case CDC Remarks4MVK-QM 5 5 No Yes With media SlotDrawer unitDrawerType8MVK-QM 4 6 1 Yes With media SlotTilt/SwivelType LIULIUST-A10-BAK-QM-R Tilt: 0° to 45° (9 step, 5deg, each)Swivel: 0° to 145° (in both direction)20 Characters x 2 lines dot display to be installed onto the POSt i lFixed TypeLIULIUST-A10-FAK-QM-R Fixed (no tilt and no swivel)20 Characters x 2 lines dot display to be installed onto the POSt i lRemote TypeLIULIUST-A10-RA-QM-R Remote: Connected to terminal with an extended cable20 Characters x 2 lines dot display to be installed onto the POSt i lPrinter Unit TRST-A10 /A15 series 1 st thermal printer. A10: single side printing, A15: dual side printingMagneticCard Reader(MCR)MCRST-A10-5K-QM-RTSBC0064701FA ISO Track 1,2,3 type magnetic card Reader kitiButton KIT-A10-BTNK-QM-R iButton unit to be installed onto the POS terminal (An iButton key isnot included)WirelessAdaptorKIT-A10-WLCK-QM-R Case and extension cable only