Toshiba ST-A10 SERIES Owner's Manual

Also see for ST-A10 SERIES: Owner's manual

Contents

3. INSTALLATION PROCEDURE3.1 Environment for Installation3-1SPAA- XXX -R13. INSTALLATION PROCEDUREWARNING!Care must be taken not to get your fingers caught between the LCD Frame and the POS terminalwhen bending the display downward.CAUTION!When removing the protective film from the display surface, please be sure to do it slowly. If it isdone quickly, static electricity may generate, and the TFT may be damaged.3.1 Environment for InstallationCAUTION!When installing the POS terminal, take the following precautions. Failure to do this may causefire, electric shock, or injury.1. Avoid locations where it is subject to the following:• Direct sunlight• High temperature, high humidity• Rapid change in temperature• Excessive vibration• Dust2. Keep away from any devices that emit magnetism or electromagnetic wave.3. Keep away from flame or moisture.4. Be sure to place the POS terminal on a level and stable surface.1. Place the POS terminal on a level surface.2. Provide a minimum space to the left, right, front and rear of the POS terminal for proper cooling.(The unit has air vents and a fan on the front and left. Spaces should be provided to prevent theair vents from being blocked and the airflow from being obstructed.)NOTE: A fan is provided on these sides. Do not block the ventilation of the fan.See NOTESee NOTE