Toshiba HD-S25 Owner's Manual

2. CONNECTING TO DVD PLAYERIn case you have a DVD player with component video outputs, but your TV has only one set ofcomponent video inputs, you may follow the AUX (refer to page 43 for explanation of AUX) connectiondescribed below to achieve a good video performance.Set the MODE-Switch (refer to page 8) to YPBPR, and then use a component video cable to connectfrom the DVD’s YP BPR output to the HD-S25 “AUX INPUT” YPBPR connectors; Use an Audio/Videocable to connect the audio connectors from DVD’s audio output to the HD-S25 “AUX INPUT” L/R: red tored (right audio) and white to white (left audio).SD OUTPUTS-VIDEOLRLRVIDEOHD OUTPUTRGB YP PB RMODEY /GPB/BPR/RHDVDRGBDIGITAL(COAXIAL)(OPTICAL)AUDIO AUX INPUTYP BP RLRComponent video cable(supplied)Audio/Video cable(supplied)DVD Player To DVD audio outputsTo DVD Y/PB/PR video outputsHD-S25YPBPRYP BP RwhiteredwhiteredMatch thecolors whenconnectingNote: 1. If you use an HD-ready TV while the HD input of your TV cannot support SD videoformat, please connect your DVD player directly to your TV via the SD video input.2. If you want to use this AUX connection, you must follow the steps below to connect theHD-S25 receiver to TV: Prepare another component video cable and use Video Connection (c) YPBPR onpage 14. Prepare another Audio/Video cable and use Audio Connection on page 15.3. There is no video format conversion in AUX mode.16