Toshiba 2460 Service Handbook

Contents

2460 ADJUSTMENT 1 - 30 September 1997 © TOSHIBA CORP.< Adjustment procedure >(1) Make a test print as in the following procedure.(2) Measure the distance “D” which is the distance to the 6th line from the leading edge of thetest print paper.10 5 1d) Registration< Adjustment order >(3) In order to set the distance “D” to 52 mm, adjust as follows.1Notes 1. An increase in the value corresponds to a decrease in the distance “D” (0.5 mm/step).2. In order to make a test print, make sure the message indicates [ 100 % A ]after the INT key is pressed.3. Adjustment value is able to be input within the range of 0 ~ 15. Default adjustmentvalue is 8.In case of the lower cassette feeding (Code “441”), adjustment value is within therange of 0~40 (Default adjustment value is 13).4. Since the lower cassette adjustment value becomes a standard for all adjustments,this adjustment must always be performed in the order stated above.Print movement directionFAXCode Set the value INT FAX 1STARTDCopier cassetteLower Upper(441) (440)LCF(443)PFP(444)ADU(445)A A A ABypass(442)PWR