Temperature ControlRotate the temperature control knob to regulate the airtemperature in the cab (Figure 7).g008836Figure 71. Wind shield wiper switch 3. Fan control2. Air conditioning switch 4. Temperature controlWind Shield LatchLift up on latches to open the wind shield (Figure 8). Pressin on latch to lock wind shield in open position. Pull out anddown on latch to close and secure wind shield.g008830Figure 81. Wind shield latchRear Window LatchLift up on latches to open the rear window. Press in on latchto lock window in open position. Pull out and down on latchto close and secure window (Figure 8).Important: The rear window must be closed beforeopening the hood or damage may occur.Using the InfoCenter LCD DisplayThe InfoCenter LCD display shows information about yourmachine such as the operating status, various diagnosticsand other information about the machine (Figure 9) Thereis a splash screen and main information screen of theInfoCenter. You can switch between the splash screen andmain information screen, at any time, by pressing any ofthe InfoCenter buttons and then selecting the appropriatedirectional arrow.1g020650234TOROg020650Figure 91. Indicator light 3. Middle button2. Right button 4. Left button• Left Button, Menu Access/Back Button—press thisbutton to access the InfoCenter menus. You can use it toback out of any menu you are currently using.• Middle Button—use this button to scroll down menus.• Right Button—use this button to open a menu where aright arrow indicates additional content.• Beeper—activated when lowering the decks or foradvisories and faults.Note: The purpose of each button may change dependingon what is required at the time. Each button will be labeledwith an icon displaying its current function.19