Toro GreensPro 1240 Service Manual

Also see for GreensPro 1240: Operator's manual

Contents

Special ToolsYou can order these special tools from your Toro Distributor. Some tools mayalso be available from a local tool supplier.Hydraulic Pressure Testing KitToro Part No. TOR47009Use this kit to take various pressurereadings for diagnostic tests. Quickdisconnect fittings are provided to attachdirectly to the mating fittings on themachine test ports without the tools. Ahigh-pressure hose is given for remotereadings. Contains 1 each: 6,900 kPa(1,000 psi), 34,500 kPa (5,000 psi), and69,000 kPa (10,000 psi) gauges.57 LPM (15 GPM) Hydraulic Tester KitToro Part No. TOR214678Use this tester to test the hydraulic circuitsand components for flow and pressurecapacities. The tester flow measurementmaximum is 57 LPM (15 GPM). This testerincludes the following:Inlet Hose – This hose connects thesystem circuit to the inlet side of thehydraulic tester.Load Valve – Turn the valve to restrict theflow to create a simulated working load inthe circuit.Pressure Gauge – A glycerine filledpressure gauge 0 to 34,500 kPa (0 to 5,000psi) to provide operating circuit pressure.Flow Meter – This meter measures theactual fluid flow in the operating circuit witha gauge rated at 5 to 55 LPM (1 to 15GPM).Outlet Hose – A hose from the outlet sideof the hydraulic tester that connects to thehydraulic system circuit.Fittings – An assortment of hydraulicfittings are included with this kit.Specifications and Maintenance: Special Tools Page 2–12 GreensPro™ 1240/126014211SL Rev A