Toro 25450A Operator's Manual

Also see for RT1200: Installation instructions Operator's manual Operator's manual Operator's manual Guide

Figure 93Front Axle1. Drain plug 3. Drain port2. Drain pan 4. Front-axle housingFigure 94Rear Axle1. Drain plug 3. Drain port2. Drain pan 4. Rear-axle housing2. Remove the plugs from the sight port and the drainport of the pinion housings for the axles (Figure 93and Figure 94).Note: Allow the oil to drain completely from thepinion housing and axle.3. Clean the threads of the plugs.4. Apply PTFE thread sealing tape to the threads of theplugs.5. Install the drain plugs into the drain ports at the pinionhousings (Figure 95 and Figure 96).Figure 95Front Axle1. Front-axle housing 4. Pinion housing2. Oil-servicing equipment 5. Sight port3. Fill plugFigure 96Rear Axle1. Rear-axle housing 4. Fill plug2. Forward 5. Sight port3. Oil-servicing equipment61