Toro 07264 Operator's Manual

Also see for Workman 1110: Service manual

Figure 71. HitchStep6Installing the Cargo BoxParts needed for this step:1 Cargo box1 Right-hand pivot bracket1 Left-hand pivot bracket4 Flange head screw (3/8 x 1 inch)1 Bolt (5/16 x 3/4 inch)1 Flange nut (5/16 inch)ProcedureNote: This procedure is only needed for ModelNo. 07264TC.1. Position the cargo box onto the frame. Thecargo box must lay flat and be centered.2. Mount the left hand pivot bracket to the leftrear corner of the frame with 2 flange headscrews (3/8 x 1 inch). Position the bracket asshown in Figure 8.Figure 81. Pivot bracket3. Slide the cargo box mounting hole onto thepivot bracket (Figure 9).Figure 91. Cargo box 3. Cargo box mounting hole2. Pivot bracket4. Insert the right hand pivot bracket into themounting hole in the cargo box and thenmount it to the frame.5. Have another person help to raise the cargobox.6. Loosen the bolt securing the prop rod clip tothe frame until you can slide the J-hook end ofthe prop rod under the clip (Figure 10).14