Toro 02000 GROUNDS PRO 2000 Operator's Manual

Contents

Engine: Briggs & Stratton Vanguard, twin-cylinder, 4-cycle, air-cooled, 11.9 kW @ 3600 rpm, 588 ccdisplacement, governed speed of 3200 rpm. Mechanicalfuel pump, large-capacity dual element air cleaner. 2.5 loil capacity.Fuel Capacity: 20 liter.Traction Drive: Eaton model 11 hydrostatic transmissionintegrally coupled to a Peerless model 1310 axle. Travelspeed range is 0–13.5 Km/h (0–8.5 mph) forward and4.8 Km/h reverse (0–3 mph).Controls: Foot-operated traction pedal. Hand-operatedthrottle, choke, ignition switch, PTO switch, lift lever,parking brake and seat adjustment.Cutting Drive: Constant-tension belt drive system withelectric clutch utilizing a poly-V belt from the engine tothe jackshaft and BX section V-belt drive from thejackshaft to each cutting unit.Tires and Wheels: Two 23 x 8.5-12 front-drive turf tireswith 4-ply construction. Rear tires for the four-wheelconfiguration, 16 x 6.5-6 turf tires with 4-plyconstruction. Rear tire for the three-wheel configuration,18 x 6.5-8 with 4-ply construction. 83–124 kPa inflationpressure for all tires.Electrical Features: 12-volt, 255 cold cranking amps at180 C, 50-amp reserve capacity at 270 C. Battery, 16-amp alternator, seat, traction, PTO and parking brakeinterlock switches; electrical leads provided for optionallight and hour meter installations.Steering: Pinion and gear sector with solid control linkto the rear steer assembly, 2.5 turns lock to lock.Brakes: Service braking accomplished throughhydrostatic transmission. Parking brake controlssecondary shaft internal to the axle assembly and isactuated by a control lever.Main Frame: All-steel welded construction utilizingtubular and formed sheet metal sectionsSeat: Standard cushion seat and optional deluxesuspension seat with arm rest and weight adjustment.The seat is adjustable fore and aft. Arm rest kit alsoavailable.Lift System: Category “0” A-Frame mounting systemconnected to the tractor via parallel linkage. One double-acting 60 mm bore, 140-mm stroke hydraulic cylinderreceiving oil from hydrostatic transmission charge pumpvia the control valve with float position. Maximumoperating pressure is 6895 kPa. When the traction unit isequipped with cutting units, all three units are raised andlowered via the single control lever. The lift systemworks with the electric clutch to engage and disengagethe cutting units.Overall Dimensions and Weight:Wheel Tread Width 105.3 cmWidth across Front Tires 132 cmWheel Base 138.5 cmOverall Length w/ Cutting Units Installed 229 cmOverall Height 119 cmTractor Weight 50.4 kgWeight with 5-Blade Fixed Cutting Units 440 kgWeight with 8-Blade Floating Cutting Units 696 kgOverall Width w/Fixed-Head Units 195 cmOverall Width w/Floating Head Units 203 cmTransport Width w/Fixed Head Units 140 cmTransport Width w/Floating Head Units 200 cmOptional Equipment:Fixed Head Kit Model No. 02100Floating Head Kit Model No. 021013-Wheel Axle Model No. 022004-Wheel Axle Model No. 02201Full Roller Kit* Model No. 03440Sectional Roller Kit* Model No. 03445Wiehle Roller Kit* Model No. 03450Skid Kit* Model No. 03446Anti-Scalp Kit* Model No. 03447Grass Basket Kit Model No. 02302Power Take-off Kit Model No. 02301Standard Seat Kit Model No. 30769Deluxe Seat Kit Model No. 30772Arm Rest Kit Model No. 30707Roller Scraper Kit* Part No. 60-9560Comb Kit* Part No. 67-9400Rear Weight Part No. 24-57909Specifications