Command ListCommand List (6/6)Command Set Command Command Packet CommentsCAM_ExExpComp Reset 8x 01 04 1F 0E 00 00 FF Exposure compensation resetUp 8x 01 04 1F 0E 02 pp FF Exposure compensation uppp: Step numberpp=00h to 7Fh (However, 00h is the same operation as 01h.)Down 8x 01 04 1F 0E 03 pp FF Exposure compensation downpp: Step numberpp=00h to 7Fh (However, 00h is the same operation as 01h.)Direct 8x 01 04 1F 4E 00 00 0p 0q FF Set the exposure compensation to the specified levelpq: Levelpq=00h to FFhCAM_ExAperture Reset 8x 01 04 1F 02 00 00 FF Aperture control resetUp 8x 01 04 1F 02 02 pp FF Aperture control uppp: Step numberpp=00h to 7Fh (However, 00h is the same operation as 01h.)Down 8x 01 04 1F 02 03 pp FF Aperture control downpp: Step numberpp=00h to 7Fh (However, 00h is the same operation as 01h.)Direct 8x 01 04 1F 42 00 00 0p 0q FF Set the aperture control to the specified levelpq: Levelpq=00h to FFhCAM_ExAutoICR Threshold(ON→OFF)8x 01 04 1F 21 00 00 0p 0q FF pq: ICR ON→OFF threshold when Auto ICR is onpq=00h to FFhOn Level 8x 01 04 1F 21 01 00 0r 0s FF pq: ICR OFF→ON when Auto ICR is onpq=00h to 1Ch