Various Functions44Adjusting the width of the guidelines(FRAME-[6])1 Display the Setup display.For details on displaying the Setup display, see“Displaying the Setup display” on page 34.2 Select FRAME by pressing v or V of the controlbutton.3 Press ENTER of the control button.The frame select display appears.4 Select FRAME-[6] by pressing v or V of thecontrol button.The guidelines of FRAME-[6] appear on the LCD.5 Adjust the width of the guidelines.1) Select WIDTH by pressing B of the controlbutton.2) Adjust the width of the guidelines by pressing vor V of the control button.3) Press ENTER of the control button.6 Press ENTER of the control button.The Setup display is retrieved.Size of printouts for FRAME-[6]At the factory, WIDTH is set to 112. The print size isobtained by multiplying the value in G with the valuesof WIDTH as shown below.(g) = WIDTH × GIf you select the size “10” with the factory settingposition, the size to be printed is as follows:(g) = 112 × 0.18 = 20.2 mmNoteThe value G is rounded so that the calculated values maynot indicate the exact ones. It is recommended tomeasure the size of the printouts to obtain the exactvalue.Tolerance: ±3%11,20 (D4/8)45(113 / 16)35(17 / 16 )7.0( 9 / 32 )27.0(11/ 8)0.1512 45(113 / 16)45(113/ 16)3.5( 5 / 32 )33.0(15/ 16)0.1913 43(1 3 / 4)33(15 / 16 )8.5( 11/ 32)23.0(29/ 32)0.1314 38(1 1 / 2)32(15 / 16 )6.0( 1/ 4)23.0(29/ 32)0.1315 34(1 3 / 8)28(11/ 8)5.0( 7 / 32 )21.0(27/ 32)0.1216 23( 29 / 32)23( 29/ 32)2.0( 3 / 32 )16.5(21/ 32)0.1Print size Factory settingFSize No. (a) mm(inches)(b) mm(inches)(c) mm(inches)(d) mm(inches)FRAME-[6]112WIDTHCHANGE SELECT OKPrint size Factorysetting GSize No. (a) mm(inches)(b) mm(inches)(g) mm(inches)1 151(6)101.6(4)59.4(2 3/ 8)0.532 120(43/ 4)90(35/ 8)48.2(1 5/ 16 )0.433 95(33/ 4)70(27/ 8)38.9(1 9/ 16 )0.344, 17 (D2) 80(31/ 4)60(23/ 8)31.1(1 1/ 4)0.275 70(27/ 8)53(21/ 8)28(1 1/ 8)0.256 70(27/ 8)50(2)28(1 1/ 8)0.257, 18 (D4) 60(23/ 8)40(15/ 8)24.9(1)0.228 54(21/ 4)54(21/ 4)28(1 1/ 8)0.259 50(2)48.5(115/ 16)24.9(1)0.22(b)(a)(g) = WIDTH x G
