Sony UP-DF550 Manual

Also see for FilmStation UP-DF550: Manual

AdjustmentMenu Operation 33To reset another type of blue thermalfilm to the default statusRepeat steps 1 to 4.Selecting a Gamma CurveWhen the gamma curve is not specified at the modalityside, the unit makes printouts with the gamma curveselected on the printer side. You can select the gammacurve to be used for each type of blue thermal film.1 Press the MENU button.2 Display the GAMMA SEL menu by pressing the For f button, then press the g button.The unit enters the gamma selecting mode.3 Press the g button.The gamma curve setting menu for UPT-517BLfilm sheets appears.When the desired gamma curve is displayed,display the type of blue thermal film the gammacurve of which you want to change by pressing thef button.Here the instructions for changing the gamma curvefor UPT-517BL film sheets are given.4 Display the desired gamma curve by pressing the Gor g button.The gamma curve for SONY 1 has been pre-set,you cannot change these settings.The gamma curves for USER 2 to USER 20 can beset to the desired value. For advice on the settings,contact your nearest Sony dealer.5 Select the next desired blue thermal film the gammacurve of which you want to change by pressing theF or f button.6 Display the desired gamma curve by pressing the Gor g button.7 Repeat steps 5 and 6 to change the gamma curve forthe remaining blue thermal films.8 Press the MENU button.The unit returns to standby status and the size andremaining amounts of each film type are displayedon the LCD.IP AddressYou can set the IP address, sub-net mask and defaultgateway address using the SYSTEM SETTINGS menuto connect the printer to the LAN network.2,51,834,6Gamma curve SettingSONY 1 Default setting (standard and basiccurve)USER 2 to USER5Each gamma curve has been preset tothe proper settings based on theSONY 1 gamma curve.USER 6 to USER20Not preset. For advice on settings,contact your nearest Sony dealer. Ifyou select one of these gamma curves,USER 6 to USER 20, before setting,the same setting as that of SONY 1 isapplied.Display the desired gamma curve by pressingthe G or g button.