Sony Trimaster PVM-L2300 Operation Manual

Also see for PVM-L2300: Product guide Operation manual Operation manual Manual Operation manual

Contents

91Displaying the Time CodeChapter 4 OperationsTo cancel the display of the audio level meterSet Audio Level Meter (page 65) to Off in the FunctionSwitch menu of the Display Function menu or by pressingthe Audio Level Meter button* of the controller.* Audio Level Meter and ALM Hold Reset are assigned to thefunction buttons of the controller in the Function Key menu (page79) of the Controller menu.Use the controller with software version 1.4 or higher toassign Audio Level Meter or ALM Hold Reset function tothe function button of the controller.Displaying the Time CodeThe time code superimposed on the SDI signals isdisplayed by installing the optional input adaptor (BKM-250TG).As the time code is superimposed on the video signal, thetime code may be invisible partially because of the scanmode setting of the monitor.1 Input the SDI signal.2 Select the channel.3 Set the time code in the Time Code menu (page 71) ofthe On Screen Set menu of the System Configurationmenu.To set the type of the time codeSet in the VITC/LTC menu.VITC: Sets to VITC.LTC: Sets to LTC.To set the display position for the time codeSet in the Position menu.Top Left: To display it at top left on the screenTop Center: To display at top center on the screenTop Right: To display at top right on the screenBottom Left: To display at bottom left on the screenBottom Center: To display at bottom center on thescreenBottom Right: To display at bottom right on thescreen4 Set Time Code (page 66) to On in the Function Switchmenu of the Display Function menu or by pressing theTime Code button* of the controller.The time code is displayed.To cancel the time code displaySet Time Code (page 66) to Off in the Function Switchmenu of the Display Function menu or by pressing theTime Code button* of the controller.* Time Code is assigned to the function button of the controller inthe Function Key menu (page 79) of the Controller menu.Use the controller with software version 1.4 or higher toassign Time Code function to the function button of thecontroller.Note(dB)0OVER-10-20-30-605 6 7 81 2 3 4Audio level Audio levelChannel numberThe level meters of eight channels including theselected channel are displayed.NoteNote