Sony STR-DN840 Operating Instructions Manual

Also see for STR-DN840: Limited warranty Quick setup guide Operating instructions Specifications Operating instructions

Contents

17GBGetting startedYou can enjoy your audio/video equipment connected to the receiver by following thesimple steps below.Before connecting cords, be sure to disconnect the AC power cord (mains lead).Installing and connecting thespeakers (page 19, 21)Checking the connection appropriatefor your equipmentConnecting the TV and videoequipment (page 23, 24)The image quality depends on the connectingjack. See the illustration below. Select theconnection according to the jacks on yourequipment.We recommend that you connect your videoequipment via HDMI connection if they haveHDMI jacks.Connecting the audio equipment(page 28)AnalogHigh quality imageDigitalPreparing the receiverSee “Connecting the AC power cord (mainslead)” (page 32) and “Turning on the receiver”(page 32).Setting the receiverSee “Setting up the receiver using the EasySetup” (page 32).Setting the audio output settings on theconnected equipmentTo output multi channel digital audio, check thedigital audio output setting on the connectedequipment.For a Sony Blu-ray Disc player, check that“Audio (HDMI),” “BD Audio MIX Setting,”“Dolby Digital/DTS,” “Dolby Digital,” and“DTS” are set to “Auto,” “Off,” “Bitstream,”“Dolby Digital,” and “DTS,” respectively (asof August 1, 2012).For a PlayStation 3, after having connected thereceiver with an HDMI cable, select the “AudioOutput Settings” in “Sound Settings,” andselect “HDMI” and “Automatic” (with systemsoftware version 4.21).For details, refer to the operating instructionssupplied with the connected equipment.