Sony SRG-300H Technical Manual

Also see for SRG300H: Brochure Operating instructions

Command ListTiming chartCommand seq=100Command seq=100Acknowledge seq=100Completion seq=100Time outController Peripheral deviceTiming chart (loss of command)ERROR(abnormality in the sequence number)seq=100Acknowledge seq=100Completion seq=100Command seq=100Command seq=100Command seq=101Acknowledge seq=101Completion seq=101Time outController Peripheral deviceTiming chart (loss of Acknowledge or completion message)IP Related SettingCommandThe following commands are provided for setting theIP address and name of this unit.No. Name Description1 Setting Protocol:InquiryThe controller inquires thenetwork setting for the camera.2 Setting Protocol:Inquiry replyThe camera replies according tothe inquiry from the controller.3 Setting Protocol:Network settingThe controller sets the networksetting of the camera.4 Setting Protocol:Network setting replyThe camera replies according tothe network setting of thecontroller.The network setting of the IP card is performed ascommunication sequence in the following.1 InquiryThe controller sends the inquiry packet to thebroadcast address (255.255.255.255), specified portnumber (52380) of UDP. The IP card replies as theinquiry reply packet.2 Network settingThe controller sends the network setting packet to thebroadcast address (255.255.255.255), specified portnumber (52380) of UDP. The receiving side sees theMAC address unit in the packet, and returnsAcknowledge as the network setting reply if it is therequest for the receiving side.