Sony SRG-300H Technical Manual

Also see for SRG300H: Brochure Operating instructions

1Basic FunctionsEffectModePower Off1)Power OnCommand IFC2) Initializing3) During displayingthe menu Memory RecallCAM_Aperture Reset/Up/Down/Direct No No No Yes4) NoDisplay info. (ON/OFF) No No No Yes4) NoCAM_PictureEffectOFF/Neg.Art/B&W No No No Yes4) NoCAM_ICR ON/OFF No No No Yes4) NoCAM_AutoICR ON/OFF/Threshold No No No Yes4) NoCAM_HR ON/OFF No No No Yes4) NoCAM_NR No No No Yes4) NoCAM-ChromaSuppress No No No Yes4) NoCAM_ColorGain No No No Yes4) NoCAM_ColorHue No No No Yes4) No1) DC power is being supplied, but the camera has been turned off by a VISCA command.2) The period from the time IF Clear is sent, until the Reply Packet is returned.3) The period from the time DC power is turned on or the camera is turned on via a VISCA command, and the camera subsequently finishes the pan/tilt reset operation and stops at the Homeposition, until the video signal is output. Or the period from the time the CAM Power ON command is sent, until Completion is returned.4) When the menu display is updating, operation is not possible.