Sony SNT-V304 User Manual

Also see for SNT-V304: Catalog User guide

preliminary33HSR View ModeImages from the HSR-1/1P/2/2P are displayed in theHSR View. Screen buttons and icons allow switchingcameras, controlling pan/tilt/zoom, changing displaymodes and controlling the HSR-1/1P/2/2P.NoteWhen multiple users are logged on at the same time,operations of other users may cause the HSR View tochange unexpectedly. Check the Users Logged Onfield to determine if other users are logged on.1 IndicatorsA blue indicator appears above a camera numberbutton to indicate that pan/tilt/zoom control isavailable via a connected EVI-D30/D31/G20/G21. Ifno video camera ID number has been set in the systemsettings, or if an EVI-D30/D31/G20/G21 is notconnected or is turned off, this indicator is coloredgray.6457 890qaqd32 Camera Number ButtonsClicking one of these buttons displays the image fromthat video camera.While monitoring an image, the camera number on thebutton corresponds to the video input terminal on theHSR-1/1P/2/2P. No camera number appears on abutton if the corresponding input terminal has been setto [DISCONNECT] for the camera connection. Whenplaying a tape, the camera number buttons aredisplayed for those cameras that were on when the tapewas recorded. In this case, no camera number appearson a button if that camera was set for [NORECORDING] at the time the recording was made.qsqkqj qh qg qf21