Setup Menu List 77SettingsVideo MenuVideoMenu items Sub items and setting values ContentsOutput On/OffSetting the videooutputSDI (Sub)On / OffTurns the SDI (Sub) output on/off.HDMIOn / OffTurns the HDMI output on/off.Output FormatSetting for theoutput formatSDI (Main) Selects the SDI (Main) output format.The setting value differs, depending on the settings of“Frequency” in “System Setting” and “Rec Format” of theSystem menu (page 101).SDI (Sub) Selects the SDI (sub) output format.The setting value differs, depending on the settings of“Frequency” in “System Setting” of the System menu and“SDI (Main)” in “Output Format” of the Video menu (page101).HDMI Selects the HDMI output format.The setting value differs, depending on the settings of“Frequency” in “System Setting” and “Rec Format” of theSystem menu (page 105).EXT IF Displays the extend IF output signal.Test Displays the video output signal.Output SettingSetting for theoutput conversionmode4K/2K to HD Conv.Letter Box / Edge Crop /Anamo ×1.3 / Anamo ×2Sets the picture frame for YPbPr format video signal.Letter Box / Edge Crop: Sets the output conversion mode for17:9 t 16:9 signal. (This setting is available only when“Format” in “Rec Format” of the System menu is set to“XAVC 4096 × 2160P” or “XAVC 2048 × 1080P.”)Anamo ×1.3 / Anamo ×2: Corrects the distortion of theimages that are output from the video output when using ananamorphic lens. (This setting is available only when “MainOperation” in “Base Setting” of the System menu is set to“RAW.”)NoteThe HD output signal when “Main Operation” in “BaseSetting” of the System menu is set to “RAW,” or the internalrecorded signal when “Setting” in “Rec Control” of theRecording menu is set to “SxS & AXS,” is “Letter Box”-equivalent signal.SD ModeLetter Box / Edge Crop /SqueezeSets the output mode (aspect) for the SD signal.