Sony LMP-H230 Operating Instructions Manual
ˎˎˎˎ1EnglishBefore operating the unit, please read this manual thoroughly and retain it forfuture reference.The projector lamp is designed to be used with the Sony projector. Beforereplacing the lamp, read the Operating Instructions of the projector and makesure that this lamp can be used for your projector.To replace the lamp, refer to the Operating Instructions of the projector.Cautionsˎˎ The lamp becomes a high temperature after turning off the projector with the / key. If you touch the lamp, you may scald your finger. When you replacethe lamp, wait for at least an hour for the lamp to cool.ˎˎ When removing the lamp unit, make sure it remains horizontal. If you pull outthe lamp unit while tilted and if the lamp breaks, the pieces may scatter,causing injury.Notesˎˎ If the lamp breaks, consult with qualified Sony personnel.ˎˎ Please do the following operations after replacing the lamp with a new one. Ifyou don’t so, the message “Please replace the Lamp.” may appear at once afterreplacing the lamp.1 Plug the AC power cord into a wall outlet.2 Turn on the projector, then select Setup menu. The following menuappears.“Settings for lamp replacement. Has the projection lamp been replaced?”.Select “Yes”, if this screen appears.If the message “Lamp replacement process is now complete” appears, select“OK”.SpecificationsLamp wattage 230 WDimensions Approx. 91.6 × 119 × 86 mm (w/d/h)(3 19/32 × 4 11/16 × 3 3/8 inches)Mass Approx. 0.3 kg (10 oz)Supplied accessories Operating Instructions (this manual)Design and specifications are subject to change without notice.Disposal of the used lampFor the customers in the USALamp in this product contains mercury. Disposal of thesematerials may be regulated due to environmentalconsiderations. For disposal or recycling information, pleasecontact your local authorities or the TelecommunicationsIndustry Association (www.eiae.org).For the customers in the U.S.A.SONY LIMITED WARRANTY - Please visit http://www.sony.com/psa/warrantyfor important information and complete terms and conditions of Sony’slimited warranty applicable to this product.For the customers in CanadaSONY LIMITED WARRANTY - Please visit http://www.sonybiz.ca/solutions/Support.do for important information and complete terms and conditions ofSony’s limited warranty applicable to this product.For the customers in EuropeSony Professional Solutions Europe - Standard Warranty and Exceptions onStandard Warranty.Please visit http://www.pro.sony.eu/warranty for important information andcomplete terms and conditions.For the customers in KoreaSONY LIMITED WARRANTY - Please visit http://bpeng.sony.co.kr/handler/BPAS-Start for important information and complete terms and conditions ofSony’s limited warranty applicable to this product.ˎˎˎˎ12230 W91.6 119 86 mm / /0.3 kg4-558-802-02(1)Projector LampOperating InstructionsMode d’emploiManual de instruccionesBedienungsanleitungIstruzioni per l’usoИнструкция по эксплуатацииLMP-H230© 2014 Sony Corporation Printed in Japan |
Related manuals for Sony LMP-H230
This manual is suitable for:
Product
Menu
Learn More
Menu
Legal
Menu
Copyright © 2024 OneStart. All Rights Reserved