PlaybackPlayback 533 Press .(previous)/> (next) onthe Remote Commander to select atitle that you want to play.Playback starts automatically from theselected title.To cancel the operationPress STOP on the Remote Commander.b Note• You cannot use Title search when [ SEARCH] isset to [OFF] on the (EDIT/PLAY) menu (it isset to [ON] by default) (p. 73).• The Title search will not function correctly whenthere is a blank section between recorded sections onthe tape.Searching for a scene by date ofrecording – Date searchWhen you are using a cassette with CassetteMemory, you can locate a scene by therecording date ([ SEARCH] is set to [ON]by default). When you are using a cassettethat does not have Cassette Memory, you canlocate the point where the recording datechanges.1 Slide the POWER switch repeatedly toselect the PLAY/EDIT mode.2 Press SEARCH M. on the RemoteCommander repeatedly to select[DATE SEARCH].3 Press . (previous)/> (next) onthe Remote Commander to select arecording date.When your cassette has Cassette Memory,you can select the recording date itself.When your cassette does not have CassetteMemory, you can select the previous or thenext date of the present point on the tape.Playback starts automatically from thepoint where the date changes.To cancel the operationPress STOP on the Remote Commander.b Note• If one day’s recording is less than 2 minutes, yourcamcorder may not accurately find the point wherethe recording date changes.• The Date search will not function correctly whenthere is a blank section between recorded sections onthe tape.• You can record date/time data for up to 6 days.When you have recorded for more than 7 days on atape, locate the date without using the CassetteMemory. To turn off the Cassette Memory, selectthe (EDIT/PLAY) menu, [ SEARCH],and then [OFF] (p. 73).1 HELLO !HAPPY BIRTHDAYHAPPY HOLIDAYS23CONGRATULATIONS !4OUR SWEET BABY5WEDDING6TITLE SEARCH 0:00:00:00 Present point onthe tapePoint where theplayback starts. / >SEARCH M.STOP1 4/JAN/ 044/JAN/ 045/JAN/ 0423DATE SEARCH 0:00:00:00 Present point onthe tapePoint where theplayback startsScreen example(when the cassette has Cassette Memory):
