Preventing data on the internal memory frombeing recovered (OCR-OV0810)E,oouto 'itEMPTY'?Data cannot be recoveredII ' !! EMPTY' II o,oouted.EST. PROCESS TIME:505 Touch [YES] --+ [YES].6 When [Completed.] appears,touch lOKI.•YES .4 Press and hold the ~ (BACKLIGHT) button down (p. 129).The [(i) EMPTY] screen appears.[(i) EMPTY] allows you to writeunintelligible data onto the internalmemory. In this way, it may become moredifficult to recover any original data. Whenyou dispose of or give the camcorder tosomebody, it is recommended that youperform [(i) EMPTY].U Noteso If you perform [(i) EMPTY], all the images aredeleted. To avoid the loss of important images,dub or copy them on other media (p. 55, 62)before performing [(i) EMPTY].o You cannot perform [Ii) EMPTY] unless youconnect the AC Adaptor to the wall outlet (wallsocket).o Disconnect all cables except the AC Adaptor.o While performing [(i) EMPTY], do not applyany vibrations or shocks to the camcorder.1 Connect the AC Adaptor to theDC IN jack on your camcorder,then connect the power cord(mains lead) to the wall outlet(wall socket).U Noteso If you stop performing [(i) EMPTY] while[Executing ... ] is displayed, be sure to completethe operation by performing [(iJ EMPTY]again before you use the camcorder the nexttime.c::::8:==3:CDQ,Q)2 Turn on your camcorder.3 Touch ~(HOME)--+~ (MANAGE MEDIA) --+ [MEDIAFORMAT] --+ [INT. MEMORY].The screen of formatting the internalmemory appears.Format?Alld."'wlllwdoloted.EST.PROCESSTIME:5177