Sony Handycam DCR-DVD610 Operating Manual

Also see for DCR-DVD710 - Dvd Digital Handycam Camcorder: Operating guide Service manual Operating guide Operating guide Limited warranty

Contents

99Performing with Your ComputerOne of the following installation screensappears, depending on the computerenvironment. Check the screen and followthe instructions displayed to install therequired software.qa Restart the computer if required tocomplete the installation.qs Remove the CD-ROM from the disc driveof your computer.x Operating the Picture Motion Browser• To start “Picture Motion Browser,” click[Start] - [All Programs] - [Sony PictureUtility] - [PMB - Picture MotionBrowser].• The basic operation of “Picture MotionBrowser” is described on “PMB Guide.”To view “PMB Guide,” click [Start] - [AllPrograms] - [Sony Picture Utility] -[Help] - [PMB Guide].x Connecting your camcorder to acomputerTo connect your camcorder to a computer,follow the steps below.1 Connect the AC Adaptor to your camcorderand a wall outlet (wall socket).2 Turn on your camcorder.3 Connect the (USB) jack ( p. 129 ) of yourcamcorder to a computer using the suppliedUSB cable.The [USB SELECT] screen appears onyour camcorder. Touch the item you wantto operate on the screen.z Tips• If the [USB SELECT] screen does not appear,touch (HOME) t (OTHERS) t[USB CONNECT].Recommended USB cable connectionTo assure the proper functioning of yourcamcorder, connect your camcorder to acomputer as below.• Connect only the camcorder to the USB port ofyour computer. Do not connect anything else toother USB ports of a computer.• When connecting to a computer with a USBkeyboard and USB mouse connected as standardequipment, connect the camcorder to anotherUSB port using the USB cable.b Notes• Operations are not guaranteed when multipleUSB devices are connected to a computer.• Be sure to connect the USB cable to a USB port.If the USB cable is connected to a computer viaa USB keyboard or USB hub, operations are notguaranteed.To disconnect the USB cable1 Click the [Unplug or eject hardware] iconon the task tray on the bottom right of thedesk top.2 Click [Safely remove USB Mass StorageDevice].3 Click [OK] (Windows 2000 only).4 Touch [END] on the screen of yourcamcorder.5 Touch [YES] on the screen of yourcamcorder.– Sonic UDF Reader*Software required to recognize a DVD-RW(VR mode) disc– Windows Media Format 9 Series Runtime(Windows 2000 only)Software required to create a DVD– Microsoft DirectX 9.0c*Software required to handle movies* Windows 2000, Windows XP onlyContinued ,