Sony Digital HDVS HDC-900 Maintenance Manual

Also see for HDC-900/L: Installation and maintenance manual Operation manual Maintenance manual

6-6 (E) HDC-900/950 MM6-1-7. Connection of EquipmentGeneral Adjustments*1 : Required only when using MSU-700A/750.*2 : When performing adjustments at the analog output, connect the CCZRGB-3 cable to the VTR 26P OUT (R, G, B) connector and theHDTV analog waveform monitor.6-1-8. Initial SettingsnIn this section, describes the adjustment procedures using MSU-700A.MSU control panelWhen MSU-700A is used. Power supply and signal switching blockALL button → OFF (dark)CAM PW button → ON (Lit)VF PW button → ON (Lit)TEST 1 button → OFF (dark)TEST 2 button → OFF (dark)BARS button → OFF (dark)CLOSE button → ON (Lit). Camera/CCU circuit ON/OFF blockKNEE OFF button → OFF (Lit)DETAIL OFF button → OFF (Lit)LVL DEP OFF button → OFF (Lit)MATRIX OFF button → OFF (Lit)AUTO KNEE button → OFF (dark)SKIN DETAIL button → OFF (dark). OthersGAMMA OFF button → ON (dark)MASTER GAIN → 0 (0 dB)FILTER(ND) button → 1 (CLEAR)FILTER(CC) button → B (3200K)ECS/SHUTTER ON button → OFF (dark)CCA-5 CABLE *1(max. 200m)MASTER SETUP UNITMSU-700A/750HD CAMERAHDC-900/910HDC-950/930Color monitorWaveform monitor75 ZA-ch2" VFHDVF-20AENG/EFPLENSHD SERIAL DIGITAL OUT *2R, G, BY, Pb, PrREMOTEWhen MSU-750 is used. Power supply and signal switching blockALL button → OFF (dark)CAM PW button → ON (Lit)VF PW button → ON (Lit)TEST button → OFF (dark)BARS button → OFF (dark)CLOSE button → ON (Lit). Camera/CCU circuit ON/OFF blockKnee Off* → OFF (Lit in reverse)Detail Off* → OFF (Lit in reverse)Level Dep Off* → OFF (Lit in reverse)Matrix Off* → OFF (Lit in reverse)AUTO KNEE button → OFF (dark)SKIN DETAIL button → OFF (dark). OthersGamma Off* → ON (Lit normally)Master Gain* → 0 (0 dB)ND (1/2/3/4/5)* → 1 (CLEAR)CC (A/B/C/D/E)* → B (3200K)ECS/Shutter* → OFF (Lit normally)*: Push the FUNCTION button, then select the function menu display.6-1. Preparations